barbas 70-55 PF2, Installation And Maintenance Manual

Page: 61 / 84

6.2.3 Disassembly of burners and burner bed
Warning: Before the start of this procedure make sure the appliance is off and
cooled down to room temperature.
Figure 40. Position of ceramic wood logs and burners
1. Remove the glass panes. Refer to chapter 6.2.1 .
2. Carefully remove the small decorative wood logs.
3. Carefully remove ceramic wood logs A and B.
4. Unscrew the 2 screws holding burners A and B.
5. Remove burners A and B.
6. Carefully remove ceramic wood logs C, D and E.
7. Unscrew the 3 screws holding burners C, D and E.
8. Remove burners C, D and E.
9. Remove the fire glass
10. Remove the 2 grates.
To assemble the burner and burner bed do the procedure above in reverse order. See
also chapter
5.3.3
.
6.2.4 Clean the standard glass
Warning: Before the start of this procedure make sure the appliance is off and
cooled down to room temperature.
Caution:
If you have anti-reflective glass, refer to chapter
6.2.5
, to avoid damage to the
anti-reflective coating on the glass.
Maintenance
Gas Fire Panorama 70-55 61