barbas 70-55 PF2, Installation And Maintenance Manual

Page: 48 / 84

6 Maintenance
6.1 Annual maintenance
• Do all procedures in this section minimum every year.
Caution:
• Use only original parts. Individual parts for replacement or accessories
are available from your Barbas dealer.
• Introduced modifications to the appliance are not permitted.
6.1.1 Clean the appliance
Safety conditions
Caution:
• Turn off the gas supply to the appliance before cleaning.
• Turn off the power supply to the appliance before cleaning.
Procedure
1. Remove the glass. Refer to chapter
6.2.1
.
2. Remove the content from the burner bed.
3. Clean the removed content carefully with a soft brush.
4. Clean the inside of the appliance, including the main burner, the pilot light burner and
the flue system.
5. Remove the grate.
Figure 39. Position of air intake and primary air inlet openings
6. Clean the combustion air intake
a) Clean the combustion air intake (A) at the bottom sides of the appliance.
b) Clean the primary combustion air inlet openings (B) of the main burners.
7. Clean the ambient light bulbs. Refer to chapter
6.2.6
.
8. Clean the convection air route.
Maintenance
48 Gas Fire Panorama 70-55