barbas 70-55 PF2, Installation And Maintenance Manual

Page: 40 / 84

5.2.9 Install the flue gas restriction plate
Safety conditions
Caution:
Install the correct restriction plate as specified in the preparation manual. An
incorrect restriction plate can cause damage to the appliance.
Procedure
1. Remove the glass panes. See chapter
6.2.1
for instructions .
2. Remove the baffle plate ( C), by unscrewing two screws.
3. Install the restriction plate (A) with the fasteners (B) in the appliance. Use the
restriction plate specified in the preparation manual.
4. Install the baffle plate ( C) again with the two screws.
Figure 29. Restriction plate and baffle
5.2.10 Install the mantel iron (option)
The appliance equipped with the 10 cm decorative frame has a mantel iron attached on
the top of the 10 cm frame
5
. The mantel iron supports brickwork or plates above the
appliance.
Make sure the brickwork or plating does not rest on the appliance directly.
1. Remove the 2 protective plates labeled "REMOVE".
5
An appliance with a 4 cm decorative frame does not need a mantel iron.
Installation
40 Gas Fire Panorama 70-55