Operation manual
Bär SmartControl 2.0
40000001186_EN_03.docx
Page 22 / 39
Date: 31/03/2020
5.4 EasyPairing
With the EasyPairing function, the Bär SmartControl 2.0 hand-held transmitter Plus accumulator can be
quickly and easily paired to a system. This makes it possible to work with personalised hand-held
transmitters in the fleet area.
However, the very first hand-held transmitter must always be paired via the "Initial hand-held transmitter
pairing" function. Alternatively, the "Subsequent hand-held transmitter pairing" function can be used.
Resetting of a hand-held transmitter which is or was already paired with another system is not required with
the EasyPairing function.
Entry
Display
Description
The following prerequisites must be met for pairing a hand-held
transmitter to a system using a docking station.
-
At least one hand-held transmitter is already paired with
this system.
-
At least one docking station is already paired with this
system.
Insert the hand-held transmitter into the docking station.
Pairing process starts automatically.
Green LED blinks and the first and second red LEDs
flash.
Pairing successful: The green LED and red LED under
the truck symbol illuminate.
The hand-held transmitter is logged in to the system and
the control voltage of the Cargolift is switched on.
The green LED only remains on if the system has the Cabin
Control option and the release signal from the camera system is
present.
