750 North Royal Avenue, Gays Mills, WI 54631 USA
Tel: +1-608-735-4800 • Fax: +1-608-735-4804 • E-mail:[email protected] • www.bapihvac.com
Building Automation Products, Inc.
Upgrade to BAPI. 100% Compatible. Guaranteed.
Sensors for HVAC/R — Temperature • Humidity • Pressure • Air Quality
FCC ID:
T4F061213RSO
Installation and Operation Instructions for the Wireless Temperature and Relative Humidity Sensor with slide
set-point and local override.
Building Automation Products, Inc.
Wireless Temperature and Relative Humidity Sensor with slide set-point
and local override
Installation and Operation Instructions
Description
The Building Automation Products, Inc. Wireless Temperature and Relative Humidity Sensor, Model BA/BS2-
WTH-SO, is a battery operated, wall mounted sensor with a 418 MHz radio transmitter.
The BA/BS2-WTH-SO is designed to require very little energy; the two internal 3.6 Volt Lithium batteries will
operate the sensor for 5 to 8 years in normal operation
The BA/BS2-WTH-SO enclosure is designed to mount directly onto a drywall surface or onto a standard 2”x4”
J-box. The enclosure is supplied with a ‘foam-back’ to minimize the effects of wall temperature on the device.
The enclosure is also provided with security screws to lock the cover and base together to prevent tampering.
The BA/BS2-WTH-SO has one internal push-button which allows for easy training and identification of the
transmitter. The push-button is used when linking the transmitter to any Analog Output Module. See BAPI’s
INS/OPS for details. The BA/BS2-WTH-SO also has an internally mounted LED. The LED will flash briefly
when the sensor transmits a data packet using the 418 MHz radio. This happens roughly about once every 10
seconds or shortly after the use of the push-button.
