Baoli F Series, Operation & Service Manual

Page: 85 / 102

79
8.2 Brief explanation for operation
(1) Starting
There is a starting protection circuit in the control box for the safety of the forklift truck.
You must shift the direction switch at the neutral position before starting the engine.
Otherwise, you can not start the engine.
Turn the key switch clockwise to the
Ⅰ
(ON) position (power position), the instrument
circuit and the firing circuit is ready for work. For diesel engine, the automatic pre-heater
begins to work and the pre-heating indicator lights. The pre-heater controlled by a time
relay automatically stops working after 13.5 seconds, then the pre-heating indicator
automatically goes out.
Turn the key switch clockwise to the
Ⅱ
(ON) position (starting position), the engine is
started.
After engine starting, push the direction switch forward (that is forward shift), then
pedal the accelerator, the forklift truck will travel or work quickly. When pull the direction
switch backward (that is in reverse shift), the backing lamps light and the back buzzers
sound.
(2) Turning handle switch
Pull the turning handle switch to the
Ⅰ
(ON) position, the front and rear combination
lamps (clearance & tail) light. Pull the turning handle switch to the
Ⅱ
(ON) position, the
head lamps light, at this time the clearance and tail lamps light.
(3) Turning signal
Pull the turning switch backward, the left front and rear turning lamps flash. Push the
turning switch forward, the right front and rear turning lamps flash.
(4) Brake signal
When parking the truck, the brake lamps (red) in the rear combination lamps light.
( 5) Backing signal
When reversing the forklift truck, pull the direction switch backward and the shift gear
is at the reversing position. Then the backing lamps (white) in the rear combination lamps
light and the buzzer sounds.
(6) Charging signal
Before starting the engine, put the key switch to the
Ⅰ
(ON) position and the charging
lamp is on. After engine starting, the charging lamp is automatically off. If the charging
lamp lights while the engine is working, it means something is wrong with the charging
circuit and you must stop working and check as soon as possible.