Baoli F Series, Operation & Service Manual

Page: 34 / 102

28
Brake pedal inspection
(1) Brake pedal
(2) Brake pedal floor clearance
1. Depress the brake pedal fully, and check the floor clearance
(clearance between the pedal and floor is not fewer than
110mm)
2. Make sure that the pedal does not go any further when it is
kept depressed.
3. Also check that no abnormality is observed with pedal
depression and return.
4. Manually depress the brake pedal to check the play until a
resistance is felt.
The value of brake pedal play: 5 mm to
８
mm.
Warning:
Ask a professional serviceman inspection if the play is
excessive, pedal movement is abnormal or brake performance is
improper.
Parking brake inspection
(1) Parking brake pedal
(2) Parking brake release lever
1. Fully press down on the parking brake pedal and inspect that
the brake is functioning normally.
2. After fully pressing the parking brake pedal, pull the parking
brake release lever toward you and confirm that the parking
brake is released.
Warning:
Ask a professional serviceman for inspection if any abnormality
is found.
Inching and brake pedal
inspection
(1) Inching and brake pedal
1. Manually depress the inching and brake pedal to check the
play until a resistance is felt.
The value of inching and brake pedal play
：
5
～
8mm
2. Depress the inching and brake pedal and check that there is
no depression or abnormal resistance.
Caution:
Ask a professional serviceman for inspection when any
abnormality is found.
Instrument inspection
Start the engine and see that they operate properly.
Fuel level check and supply
(1) Fuel tank cap
1. Observe the fuel meter to see if the fuel is sufficient.
Note: After the end of daily operation, fill the tank with fuel to
prevent the moisture in the air in the tank from mixing into the
fuel.
2. When supplying fuel, stop the engine, remove the fuel tank
cap by turning it counterclockwise, and pour fuel through the fuel
filler neck.
3. After fueling, be sure to tighten the fuel tank cap.
Caution:
．
Always stop the engine and keep any fire source away before
and during the fueling operation.
．
Carefully prevent entrance of water and dirt into the tank during
fueling.