Baoli F Series, Operation & Service Manual

Page: 31 / 102

25
2. Inspection content
Walk around inspection
Vehicle uprightness Does the vehicle lean to one side or the other? If it, check for a
tyre puncture or a problem with the undercarriage.
Beneath the vehicl
e
Check for any oil or water leakage on the ground or floor where
the vehicle was parked. Check for loose parts or damage.
If any unusual condition is found, have the vehicle inspection by
a professional serviceman.
Tyre inspection Tyre inflation pressure
1. Use a tyre pressure gauge and measure the inflation
pressure. Adjust it to the proper level.
The tyre pressure is referred to the corresponding section in the
manual or according to the decal of the vehicle.
2. After the adjustment, check if air is not leaking from the valve.
Damage, crack and wear of tyres and rims
Check the tyres for damage and wear, and the rims for bending.
If the tyres are damaged, or there is a marked difference in the
wearing of tyres between the front and rear or between the left
and right is perceived, or bent rims are found, ask a professional
serviceman for inspection.
Hub nut inspection Check the tightness of the hub nuts.
Avoid uneven torque and tighten all of the nuts uniformly. Refer
to the corresponding section for proper torque.
Lamp inspection Are the filaments intact? Is there any lens damage?
Always keep the lenses clean to insure proper forward vision.