Baoli F Series, Operation & Service Manual, Page: 12 / 102

6
5.1 Switch (Fig.1.3)
No. Name Operation and attention
1 Ignition switch
O (OFF): Engine stop position. Key insertion and withdraw
are performed in this position.
I (ON): Engine operation position. Locate one position
clockwise from O (OFF) position.
The intake heater is preheated before starting the diesel
forklift.
START: Engine start position. Locate one position
clockwise from the I (ON) position.
After engine start, release the key and it will return to the
I(ON) position automatically.
Caution:
．
Never operate the ignition switch before sitting on the
seat.
．
For the sake of safety it is recommended to always start
the engine with the transmission gear shift lever shifted in
the neutral position.
．
Do not turn the switch to the START position while the
engine is running.
．
Do not leave the switch in the ON position when the
engine is stopped. It may cause over discharge of the
battery.
．
Do not operate the starter motor for more than 15
seconds continuously. Return the switch to the OFF
position and wait at least 30 seconds prior to attempting
restart.
2 Integrated light and turn signal
switch
(1) Left turn
(2) Right turn
This switch serves as both two-position light control and
turn signal switch.
Light control switch
Lamp name Step1 Step2
Head lamps
— ○
Side clearance lamps
○ ○
Caution:
Do not keep lamps such as head lamps kept on for a long
time when the engine is stopped. It may cause over
discharge of the battery to make engine starting
impossible.
Turn signal switch
Make the turn signal lamps blink.
Left turn…………………..Push forward
Right turn…………………Pull backward
Caution:
The signal switch will operate when the ignition switch is
ON.