4 Select TEACH/SET Method
Self-Contained Models: To select Light SET, Dark SET, Window SET, Two-Point Static TEACH, or Dynamic TEACH, follow
these steps.
Opposed-Mode Models: When using the receiver to select Light SET, Dark SET, Window SET, Two-Point Static TEACH,
Dynamic TEACH, or Opaque mode, follow these steps.
1. Initiate select TEACH/SET Method.
Method
Action
Result
Push Button
Click the button five times
The green LED turns off and the amber LED
flashes at 1 Hz.
Remote Input
Pulse the remote input line five times
2. Select TEACH/SET Method.
Method
TEACH/SET Method
Action
Result
Push Button
Two-Point Static TEACH
Click the button one time
The selected TEACH/SET
method is enabled.
Dynamic TEACH
Click the button two times
Window SET
Click the button three times
Light SET
Click the button four times
Dark SET
Click the button five times
Opposed-Mode Models:
Opaque Mode
Click the button six times
IO-Link
Two-Point Static TEACH
Set BDC1 Mode using IO-Link
Dynamic TEACH
Window SET
Light SET
Dark SET
Opposed-Mode Models:
Opaque Mode
Remote Input
Two-Point Static TEACH
Pulse the remote line one time
Dynamic TEACH
Pulse the remote line two times
Window SET
Pulse the remote line three times
Light SET
Pulse the remote line four times
Dark SET
Pulse the remote line five times
Opposed-Mode Models:
Opaque Mode
Pulse the remote line six times
WORLD-BEAM QS18 Expert with IO-Link
14
www.bannerengineering.com - Tel: + 1 888 373 6767
