6.6.9 Select and Visualize Areas on the Graph
Use the left-hand panel to select the areas to handle and manage on the graph (Safety, Warning, Muting, or Reference
Points), and to select which of the series of scanners (master or specific remote) is shown and managed on the graph.
Figure 66. Selecting areas to manage
1. Select the desired scanner in the series by clicking on it, highlighting it.
2. Click on the label name (outside the check box) to highlight a specific area, e.g. a Safety or Warning Zone.
3. Clicking on the checkbox to select and edit a specific area and to show this area in the background.
For example, click on the box of the safety area to assist in sizing the warning zone. The safety zone is shown as a
shaded area.
Figure 67. Selected area (shaded) and the area being defined
SX Safety Laser Scanner
92
www.bannerengineering.com - Tel: + 1 888 373 6767
