Banner SureCross FlexPower BWA-SOLAR-001 Manual Download Page 1

Printed in USA 

Feb 2012  

P/N 137304 rev. F

 WARNING . . . Not To Be Used for Personnel Protection

Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.

These devices do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications. 

A device failure or malfunction can cause either an energized or de-energized output condition. Consult your current Banner 

Safety Products catalog for safety products that meet OSHA, ANSI, and IEC standards for personnel protection.

SureCross™ 

Flex

Power™ Solar Supply

Includes the solar panel, mounting kit, and rechargeable battery pack

Features

The 

Flex

Power Solar Supply provides autonomous power for continuous wireless sensing 

and monitoring applications in a compact, plug-and-play power solution.

• 

Flex

Power Solar Supply with rechargeable battery pack provides reliable power 

(nominal 5.0V dc) for applications with higher power demands than a standard DX81 

or DX81P6 can supply 

• 

Solar Supply includes the panel, charge controller, rechargeable battery pack, and 

mounting hardware

• 

Weather resistant environmental enclosure

For additional information and a complete list of SureCross accessories, refer to Banner 

Engineering’s website,

 

www.bannerengineering.com/surecross

Model

Nominal Output Voltage

Replacement Battery Pack

BWA-SOLAR-001

5.0V dc

BWA-BATT-003 Replacement battery and 

controller pack

Models

Figure 1 - The assembled FlexPower Solar Supply.

Summary of Contents for SureCross FlexPower BWA-SOLAR-001









Reviews: