6.6 System Info
Various DXM system settings are shown in this menu. The Push, Ethernet, and Cell parameters are helpful for debugging
network connections. This is a read only menu.
Figure 29. System Info menu
System Info
Controller
Push
ISM Radio
Date:
Firmware:
Build:
Model:
Serial:
Method:
Interval: hh:mm
URL:
Page:
Https: on/off
Site ID:
Serial:
Model:
Date:
RF FW Pt:
RF FW Ver:
RF EE Pt:
RF EE Ver:
to change the value
to accept
ENTER
BACK
to return to the previous menu
↑ ↓
Ethernet
DHCP:
IP:
Subnet:
Gate:
Mac:
DNS1:
DNS2:
Cell
Signal:
Phn#:
Dev#:
SIM:
CellVer:
CellMdl:
CellFw:
CellMask:
Wifi
IP:
Mode:
AP:
Stat:
Script
Path:
Baud:
Code:
LCD Board
Serial:
Model:
Date:
RF FW Pt:
RF FW Ver:
RF EE Pt:
RF EE Ver:
Controller
Displays the date, build, model, and serial number.
Push
Shows the current parameters loaded from the XML configuration that applies to pushing data to a webserver,
including method (Ethernet or cellular), interval, URL, page, HTTPS, and site ID.
ISM Radio
Displays the serial number, model, date, firmware part numbers, and version numbers.
Ethernet
Displays the IP address, MAC address, DHCP, Gateway address, and DNS settings.
Cell
Shows the cellular MEID number (Mobil Equipment Identifier), MDN (Mobil Device Number), version, signal, firewall
setting, and firewall mask. Some of these parameters are not visible until the cellular network is accessed.
Wifi
Displays the Wifi IP address and other settings.
Sure Cross
®
DXM700-Bx Wireless Controller
www.bannerengineering.com - Tel: + 1 888 373 6767
41
