11 Accessories
11.1 Cordsets
Machine interface cordsets provide power to the emitter/receiver pair. Cordsets typically have yellow PVC cables and black
overmolds.
A removable disconnect (RD) is required to connect directly to the sensor housing. QD connectors are used for cable-to-
cable interconnections and connections to other devices.
Single-ended (to connect to the machine interface):
RDLS-8..D RD-to-flying leads is used with sensors without a 300 mm pigtail M12 QD
QDE-8..D QD-to-flying leads is used with sensors with a 8-pin 300 mm pigtail M12 QD (model ends in P8)
QDE-5..D QD-to-flying leads is used with sensors with a 5-pin 300 mm pigtail M12 QD (model ends in P5)
Double-ended
DEE2R-8..D M12 QD-to-M12 QD (female-male) is used for extending the length of cordsets and directly connects to
other devices with a 8-pin M12 QD
DEE2R-5..D M12 QD-to-M12 QD (female-male) is used for extending the length of cordsets and directly connects to
other devices with a 5-pin M12 QD
MQDEC-4..SS M12 QD-to-M12 QD (female-male) is used for connecting to devices that do not have earth ground on
pin 5 of a 5-pin QD (In such situations, earth ground must be provided via the mounting brackets)
DELSE-81D RD-to M12 QD (male) is used to create or replace an 8-pin 300 mm pigtail M12 QD
DELSE-51D RD-to M12 QD (male) is used to create or replace a 5-pin 300 mm pigtail M12 QD
Splitter cordsets
CSB-M128..M1281 allow easy interconnection between an 8-pin receiver and 8-pin emitter, and provides a single trunk
cable for the optional interchangeable ("swapable") hookup
CSB-M125..M1251 allow easy interconnection between a 5-pin receiver and 5-pin emitter, and provides a single trunk
cable for the optional interchangeable ("swapable") hookup
Note: See
on page 34 for maximum cordset lengths.
EZ-SCREEN LS Connection Examples
Figure 35. 300 mm Pigtail with M12/Euro-style QD
Figure 36. RD Connection with 8-Wire Flying Lead Cordset
EZ-SCREEN
®
LS Basic Safety Light Screen
58
www.bannerengineering.com - Tel: 763.544.3164