Short Name
Data Format
Meaning of data
Power Cycle Required
1/0
ISD Device detects a fault, a power cycled required
Table 3: Individual Unit Data—Configuration
Short Name
Data Format
Meaning of data
Local Reset Unit
1/0
The ISD Device includes the latch feature
High Coding Level
1/0
The SI-RF sensor coding level is High/Unique
Cascadable
1/0
The ISD Device includes the cascade feature
Note: This will always be true for SI-RF models with ISD.
Fault Tolerant Outputs
1/0
Indicates that the ISD Device includes the fault tolerant output feature where
output faults cause a 20 minute off delay/fault delay
Note: This will always be true for SI-RF models with ISD.
Table 4: Individual Unit Data—Values
Short Name
Data Format
Meaning of data
Device
Type of ISD Device
Expected Code
For SI-RF sensors with high or unique coding, displays the actuator code
taught to the sensor
Received Code
Displays the actuator code detected by the SI-RF sensor
Teach-ins Remaining
number
For SI-RF sensors with high and unique coding, displays the remaining
number of teaches available
Note: Low and already taught unique units display (0).
Number of voltage errors
number
The number of voltage warnings received in the last 60 seconds (voltage is
checked every second), a number between 0 and 60
Number of operations
number
The number of on/off cycles the sensor has experienced
Output Switch-off time
number
The delay counter for certain output errors (0 = inactive, 20 to 1 = remaining
minutes to device lockout state)
Range Warning Count
number
For SI-RF Sensors, a count of the number of range warnings received in the
last 60 minutes. The counter increments when at least half of the RFID read
attempts in a minute had a range warning.
Supply Voltage
number
The actual input voltage detected by the ISD sensor
Internal Temperature
number
The internal temperature of the ISD Sensor (°C)
Actuator Distance
number
The distance the actuator is from the SI-RF sensor. This value is displayed as
a percentage of the range of the SI-RF sensor.
Expected Company Name
Banner's company code is 6
Received Company Name
Banner's company code is 6
6.4 Contact Us
Banner Engineering Corp. headquarters is located at:
SI-RF Non-Contact RF Safety Switch
www.bannerengineering.com - Tel: + 1 888 373 6767
23
