4.6 Equipment
Figure 6. Equipment
The Equipment view is used to select the base model, add the expansion modules (input and output), and add input
devices and status outputs. Add the expansion modules by clicking
to the right of the Base Controller module.
The Base Controller module can be customized by either double-clicking the module or selecting it and clicking Edit under
the Properties table on the left and selecting the appropriate Controller features (display, Ethernet, expandability). The
properties of Safety and Non-Safety inputs, Status Outputs, Logic Blocks, and Function Blocks are also configured by either
double-clicking the block or selecting it and clicking Edit under the Properties table. Clicking the block the second time
de-selects it.
XS/SC26-2 Safety Controller
18
