manualshive.com logo in svg

Banner SC26-2 Series, Instruction Manual

The Banner SC26-2 Series is an advanced industrial sensor system with exceptional performance and reliability. Unlock the full potential of this product by accessing the comprehensive user manual available for free download at manualshive.com. The manual acts as an invaluable resource, providing detailed instructions and insights for optimal utilization.

Share
Download
background image

11 Standards and Regulations

The list of standards below is included as a convenience for users of this Banner device. Inclusion of the standards below

does not imply that the device complies specifically with any standard, other than those specified in the Specifications

section of this manual.

11.1 Applicable U.S. Standards

ANSI B11.0 Safety of Machinery, General Requirements, and Risk

Assessment
ANSI B11.1 Mechanical Power Presses
ANSI B11.2 Hydraulic Power Presses
ANSI B11.3 Power Press Brakes
ANSI B11.4 Shears
ANSI B11.5 Iron Workers
ANSI B11.6 Lathes
ANSI B11.7 Cold Headers and Cold Formers
ANSI B11.8 Drilling, Milling, and Boring
ANSI B11.9 Grinding Machines
ANSI B11.10 Metal Sawing Machines
ANSI B11.11 Gear Cutting Machines
ANSI B11.12 Roll Forming and Roll Bending Machines
ANSI B11.13 Single- and Multiple-Spindle Automatic Bar and Chucking

Machines
ANSI B11.14 Coil Slitting Machines
ANSI B11.15 Pipe, Tube, and Shape Bending Machines

ANSI B11.16 Metal Powder Compacting Presses
ANSI B11.17 Horizontal Extrusion Presses
ANSI B11.18 Machinery and Machine Systems for the Processing of

Coiled Strip, Sheet, and Plate
ANSI B11.19 Performance Criteria for Safeguarding
ANSI B11.20 Manufacturing Systems
ANSI B11.21 Machine Tools Using Lasers
ANSI B11.22 Numerically Controlled Turning Machines
ANSI B11.23 Machining Centers
ANSI B11.24 Transfer Machines
ANSI/RIA R15.06 Safety Requirements for Industrial Robots and Robot

Systems
ANSI NFPA 79 Electrical Standard for Industrial Machinery
ANSI/PMMI B155.1 Package Machinery and Packaging-Related

Converting Machinery — Safety Requirements

11.2 Applicable OSHA Regulations

OSHA Documents listed are part of: Code of Federal Regulations Title 29, Parts 1900 to 1910
OSHA 29 CFR 1910.212 General Requirements for (Guarding of) All Machines
OSHA 29 CFR 1910.147 The Control of Hazardous Energy (lockout/tagout)
OSHA 29 CFR 1910.217 (Guarding of) Mechanical Power Presses

11.3 Applicable European and International Standards

ISO 12100 Safety of Machinery – General Principles for Design — Risk Assessment and Risk Reduction
ISO 13857 Safety Distances . . . Upper and Lower Limbs
ISO 13850 (EN 418) Emergency Stop Devices, Functional Aspects – Principles for Design
ISO 13851 (EN 574) Two-Hand Control Devices – Functional Aspects – Principles for Design
IEC 62061 Functional Safety of Safety-Related Electrical, Electronic and Programmable Control Systems
ISO 13849-1 (EN 954-1) Safety-Related Parts of Control Systems
ISO 13855 (EN 999) The Positioning of Protective Equipment in Respect to Approach Speeds of Parts of the Human Body
ISO 14119 (EN 1088) Interlocking Devices Associated with Guards – Principles for Design and Selection
IEC 60204-1 Electrical Equipment of Machines Part 1: General Requirements
IEC 61496 Electro-sensitive Protection Equipment
IEC 60529 Degrees of Protection Provided by Enclosures
IEC 60947-1 Low Voltage Switchgear – General Rules
IEC 60947-5-1 Low Voltage Switchgear – Electromechanical Control Circuit Devices
IEC 60947-5-5 Low Voltage Switchgear – Electrical Emergency Stop Device with Mechanical Latching Function
IEC 61508 Functional Safety of Electrical/Electronic/Programmable Electronic Safety-Related Systems

XS/SC26-2 Safety Controller

 

 

 

114

 

Summary of Contents for SC26-2 Series






















































































































Reviews:

No comments

Related manuals for SC26-2 Series

FAAC E550 Manual preview
E550
Brand: FAAC Pages: 12
GE TLE Scalable 150 Quick Start Manual preview
TLE Scalable 150
Brand: GE Pages: 6
GE SIMON XT Instruction Manual preview
SIMON XT
Brand: GE Pages: 3
GE NetworX Series Installation And Start-Up Manual preview
NetworX Series
Brand: GE Pages: 80
GE PACSystems* RX3i Application Manual preview
PACSystems* RX3i
Brand: GE Pages: 39
GE PACSystems* RX3i Secure Deployment Manual preview
PACSystems* RX3i
Brand: GE Pages: 35
GE PACSystems* RX3i Important Product Information preview
PACSystems* RX3i
Brand: GE Pages: 3
GE PACSystems* RX3i User Manual preview
PACSystems* RX3i
Brand: GE Pages: 169
GE PACSystems RX7i Reference Manual preview
PACSystems RX7i
Brand: GE Pages: 317
CALEFFI 145 Series Installation And Commissioning Manual preview
145 Series
Brand: CALEFFI Pages: 12
CALEFFI QuickSetter+ 132 Series User Manual preview
QuickSetter+ 132 Series
Brand: CALEFFI Pages: 5
Rabbit RCM2000 Getting Started Manual preview
RCM2000
Brand: Rabbit Pages: 38
R82 Serval Mounting Instruction preview
Serval
Brand: R82 Pages: 8
Yaesu FT-2000 - MENU MODE LIST Operating Manual preview
FT-2000 - MENU MODE LIST
Brand: Yaesu Pages: 56
AUMA SAE 07.2 Series Operation, Assembly And Commissioning Instructions preview
SAE 07.2 Series
Brand: AUMA Pages: 116
Lauda LRZ 921 Operation Manual preview
LRZ 921
Brand: Lauda Pages: 40
Objective Imaging OASIS-4i Installation Manual preview
OASIS-4i
Brand: Objective Imaging Pages: 11
schmersal AES 1175 Operating Instructions Manual preview
AES 1175
Brand: schmersal Pages: 6

Brands by name

Popular brands

Load more brands