4.5 Live Sensor Data Controls
After connecting to the sensor, data sampling begins automatically (but not recording).
To stop data sampling, click
Stop. This is required to load/save a configuration.
To restart data sampling, click
Play. This only samples data from the sensor and displays it on the plot; it does not
record the data to a log file.
To record data to a log file, click
Record. The log file selection prompt displays. Save the log file as desired. The log file
format is Common Data Format v3.7.0.
R-GAGE
®
Q130RA Sensor
www.bannerengineering.com - Tel: + 1 888 373 6767
11
