Banner Q3XTBLD150-Q8 Instruction Manual Download Page 31

9 Banner Engineering Corp Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of

shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the 

time

 it is

returned to the factory, is found to have been 

defective

 during the warranty period. This warranty does not cover damage or liability for

misuse, abuse, or the improper 

application

 or 

installation

 of the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING,

WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING

UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the 

discretion

 of Banner Engineering Corp., replacement. IN NO EVENT SHALL

BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES,

LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM

THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY,

NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any 

obligations

or 

liabilities

 

relating

 to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper 

application

 or

installation

 of this product or use of the product for personal 

protection

 

applications

 when the product is 

identified

 as not intended for

such purposes will void the product warranty. Any 

modifications

 to this product without prior express approval by Banner Engineering

Corp will void the product 

warranties.

 All 

specifications

 published in this document are subject to change; Banner reserves the right to

modify product 

specifications

 or update 

documentation

 at any 

time.

 

Specifications

 and product 

information

 in English supersede that

which is provided in any other language. For the most recent version of any 

documentation,

 refer to: 

www.bannerengineering.com

.

 

 

Q3X Laser Contrast Sensor

 

www.bannerengineering.com - Tel: 763.544.3164

31

Summary of Contents for Q3XTBLD150-Q8
































Reviews: