10. Select Assign name under Functions.
Figure 147. Assign Name
The Assign name window displays. The devices in the network are discovered. The Name column is blank.
11. Select the device that will have a name assigned to it.
12. Click Assign name to start the process.
The name is assigned.
Figure 148. Assign Name
Using Siemens SIMATIC STEP 7 (v5.5) Software
Installing the Banner
iVu BCR
GSD File
Use these instructions to install the Banner iVu BCR GSD file in the Siemens SIMATIC STEP 7 (v5.5) software.
1. Start Siemens SIMATIC Manager.
2. Select an existing project and open it.
3. Select the Station (PLC) from the Object Hierarchy list.
iVu Plus BCR Gen2 Series Sensor
www.bannerengineering.com - Tel: + 1 888 373 6767
155