Banner EZ-SCREEN SLS, Instruction Manual

Page: 96 / 114

May 22, 2023
EZ-SCREEN SLS Safety Light Curtain Instruction Manual
96
Continued from page 95
Model Description
BF1801L024
18 amp positive-guided contactor, 3 normally open (N.O.) and 1 normally closed (N.C.) (N.C. contact rated at 10
amps)
Safety Controllers provide a fully configurable, software-based safety logic solution for monitoring safety and non-safety de-
vices.
For additional models and XS26 expansion modules, see instruction manual p/n 174868 .
Non-Expandable Models Expandable Models Description
SC26-2 XS26-2 26 convertible I/O and 2 redundant solid state safety outputs
SC26-2d XS26-2d 26 convertible I/O and 2 redundant solid state safety outputs with display
SC26-2e XS26-2e 26 convertible I/O and 2 redundant solid state safety outputs with Ethernet
SC26-2de XS26-2de 26 convertible I/O and 2 redundant solid state safety outputs with display and Ethernet
SC10-2roe 10 inputs, 2 redundant relay safety outputs (3 contacts each) (ISD and Ethernet compatible)
XS26-ISDd 26 inputs, 2 redundant solid state safety outputs with display, Ethernet, and 8 ISD channels
Model Mounting Description
MMD-TA-11B
DIN-mount Muting module
2 N.O. safety outputs (6 amps), 2 or 4 muting inputs, SSI, override input; IP20; terminal
connections
MMD-TA-12B 2 OSSD outputs, 2 or 4 muting inputs, SSI, override input; IP20; terminal connections
AC power supply for use with EZ-SCREEN SLS emitters and/or receivers. Models EZAC-R.. can be interfaced with up to
three receivers or two cascaded emitter/receiver pairs; models EZAC-E.. can power up to four emitters. Box su24 V
DC power at 0.7 amps (16.8 W max. power); accepts input voltages from 100 to 250 V AC (50 to 60 Hz); IP65 metal housing.
Models are available with external device monitoring (EDM); key reset switch on EZAC-R.. models (Emitter/Receiver mod-
els). See datasheet p/n 120321 for more information.
Emitter/Receiver Boxes
Model Outputs EDM
Emitter/Receiver Con-
nection
AC Power Connec-
tion
Output and EDM Con-
nections
EZAC-R9-QE8 3 N.O.
Selectable 1- or 2-
Channel or no EDM
8-Pin M12 QD
Hard-wired Hard-wired
EZAC-R11-QE8 2 N.O., 1 N.C.
EZAC-R15A-QE8-QS83 1 N.O. + 1 SPDT (Form C) 1-Channel
3-pin 7/8 in-16UNF
QD
8-pin 7/8 in-16UNF
QD
EZAC-R8N-QE8-QS53 1 N.O., 1 N.C.
Power Monitoring
3-pin 7/8 in-16UNF
QD
5-pin 7/8 in-16UNF
QD
EZAC-R10N-QE8-QS53 2 N.O.
Emitter-Only Boxes
Model For Emitter Models Emitter Connection AC Power Connection
EZAC-E-QE8 SLPE..-..Q8 (without Test input) 8-Pin M12 QD
Hard-wired
EZAC-E-QE5 SLSE..-..Q5 (with Test input) 5-Pin M12 QD
EZAC-E-QE8-QS3 SLPE..-..Q8 (without Test input) 8-Pin M12 QD 3-Pin 7/8 in-16UNF QD
EZAC-E-QE5-QS5 SLSE..-..Q5 (with Test input) 5-Pin M12 QD 5-Pin 7/8 in-16UNF QD
Safety Controllers
10.4
Safety controller models Table 11.
Muting Modules
10.5
AC Boxes
10.6
© Banner Engineering Corp.