Banner EZ-SCREEN SLS, Instruction Manual

Page: 71 / 114

May 22, 2023
EZ-SCREEN SLS Safety Light Curtain Instruction Manual
(1)
150 mm SLSC.. systems not available.
71
•
•
Continued from page 70
Defined Area Height Emitter (8-pin) Receiver Emitter/Receiver Pair Number of Beams
Response Time (Tr)
(ms)
1800 mm (70.9 in) SLSCE14-1800Q8 SLSCR14-1800Q8 SLSCP14-1800Q88 240 56
Other available models:
To order the 5-pin emitters with Test input models, replace the suffix “Q8” with “Q5”, (e.g., SLSCE14-300Q5), and for the pair
replace “Q88” with “Q85” (e.g., SLSCP14-300Q85). If a 5-pin emitter is used in the first (“master”) position in a cascaded sys-
tem, then 5-pin emitters must be used in all other positions in that cascade.
To order the pigtail QD (8-pin models only), replace the “Q” in the model number with “P” (e.g., SLSCE14-300P8).
To order the ESD-safe models, add “N” to the model number, prior to the QD option designation (e.g., SLSCE14-300NQ8).
ESD-safe models are not available with the pigtail QD option.
Optional housing finishes include the following. Add the model code before the QD designation in the model number:
add “A” for a clear (brushed) anodized aluminum finish, black endcaps (e.g., SLSCE14-300AQ8),
add “S” for a nickel-plated (“silver”) finish, black endcaps (e.g., SLSCE14-300SQ8),
For cabling options, see " Cordsets " on page 91 . Only standard 8-pin QD models are listed; 8-pin emitters/receivers feature
“swapable” wiring; see " Initial Electrical Connections " on page 35 and "Sensor "Swapability"" on page 46 .
Machine interface/power cables (one per end sensor, two per pair): Use QDE-..D cables.
Sensor interconnect cables (one per cascaded sensor, two per pair): Use DEE2R-..D cables.
Defined Area Height
(1)
Emitter (8-pin) Receiver Emitter/Receiver Pair
Number of
Beams
Response Time
(Tr) (ms)
300 mm (11.8 in) SLSCE30-300Q8 SLSCR30-300Q8 SLSCP30-300Q88 20 11
450 mm (17.7 in) SLSCE30-450Q8 SLSCR30-450Q8 SLSCP30-450Q88 30 13
600 mm (23.6 in) SLSCE30-600Q8 SLSCR30-600Q8 SLSCP30-600Q88 40 15
750 mm (29.5 in) SLSCE30-750Q8 SLSCR30-750Q8 SLSCP30-750Q88 50 17
900 mm (35.4 in) SLSCE30-900Q8 SLSCR30-900Q8 SLSCP30-900Q88 60 19
1050 mm (41.3 in) SLSCE30-1050Q8 SLSCR30-1050Q8 SLSCP30-1050Q88 70 21
1200 mm (47.2 in) SLSCE30-1200Q8 SLSCR30-1200Q8 SLSCP30-1200Q88 80 23
1350 mm (53.1 in) SLSCE30-1350Q8 SLSCR30-1350Q8 SLSCP30-1350Q88 90 25
1500 mm (59 in) SLSCE30-1500Q8 SLSCR30-1500Q8 SLSCP30-1500Q88 100 27
1650 mm (65 in) SLSCE30-1650Q8 SLSCR30-1650Q8 SLSCP30-1650Q88 110 30
1800 mm (70.9 in) SLSCE30-1800Q8 SLSCR30-1800Q8 SLSCP30-1800Q88 120 32
1950 mm (76.8 in) SLSCE30-1950Q8 SLSCR30-1950Q8 SLSCP30-1950Q88 130 32
2100 mm (82.7 in) SLSCE30-2100Q8 SLSCR30-2100Q8 SLSCP30-2100Q88 140 36
2250 mm (88.6 in) SLSCE30-2250Q8 SLSCR30-2250Q8 SLSCP30-2250Q88 150 38
2400 mm (94.5 in) SLSCE30-2400Q8 SLSCR30-2400Q8 SLSCP30-2400Q88 160 40
Other available models:
To order the 5-pin emitters with the Test input, replace suffix “Q8” with “Q5”, (e.g., SLSCE30-300Q5), and for the pair replace
“Q88” with “Q85” (e.g., SLSCP30-300Q85). If a 5-pin emitter is used in the first (“master”) position in a cascaded system,
then 5-pin emitters must be used in all other positions in that cascade.
To order the pigtail QD (8-pin models only) model, replace the “Q” in the model number with “P” (e.g., SLSCE30-300P8).
To order the ESD-safe models, add “N” to the model number, prior to the QD option designation (e.g., SLSCE30-300NQ8).
ESD-safe models are not available with the pigtail QD option.
Cascadeable Emitter and Receiver Models with 30 mm Resolution
8.2.2
© Banner Engineering Corp.