The 2" Flow Meter Series are a full-bore, plastic-bodied electromagnetic
flow meter designed for flow and usage monitoring applications in 2" pipe.
The polypropylene flow tube offers corrosion resistance to a wide range of
chemicals. Its light weight and clamp flanges allow it to be easily installed
or removed from the pipe for inspection. There are multiple configurations.
With no moving parts, the magmeter permits unobstructed flow,
minimizing flow disturbances. The 2" Meter Series can be used in
piping configurations where there is little space between the meter
and valve. The 2" Meter Series, like other magmeters, are resistant to
wear from debris. Since there are no bearings or propeller to wear out,
downtime and maintenance are kept to a minimum. Because there are no
mechanical parts in the flow stream, the meter tolerates high flows without
damage. Please note that flow does not automatically turn the meter on.
The hinged, polyethylene cover protects from dust and UV rays, while
permitting easy access to the LCD flow rate and total display. The
electronics housing is made of rugged powder-coated die-cast aluminum.
Flow rate and total can be displayed in a variety of units, customer-
selected and factory-set.
The 2" Meter Series are used for tracking flow rates and total flow in
usage monitoring applications. These would include wells, industrial
wastewater, leach mining discharge, cooling tower deduct metering, turf
and landscape applications, and other water reclamation operations.
When changing the batteries, the 2" is designed to retain the internal
settings and flow total.
The DC flow meters are externally powered via a 5-pin connector cable
(20ft/6m) which also provides pulse output for use with a variety of
displays and controls for remote reading, data logging, pulse-to-analog
conversion, and telemetry applications.
The standard flow meters are a battery-operated unit for use when
pulse output is not required. The batteries are user replaceable with an
approximate 1-year life under continuous use, or more depending on
the duty cycle. The flow meters shut off after 15 minutes of inactivity to
preserve battery life.
MFM220 & MFM220DC
Plastic-Bodied Magmeter
APPLICATIONS
Usage monitoring, such as:
• Industrial wastewater discharge monitoring
• Cooling tower deduct metering
• Heap leach mining discharge monitoring
• Well monitoring
• Turf and landscape water monitoring
• Agriculture liquid monitoring
FEATURES
• Simple as a mechanical meter
• No moving parts
• Minimal straight pipe required
• Battery powered
• Built-in rate & total indicator
• Corrosion resistant
Unobstructed Flow
150 Banjo Drive Crawfordsville, IN 47933
ph: 765-362-7367 fax: 800-458-0232
www.banjocorp.com
Manual# FMM2000
* Will not read petroleum
based liquids.
