设备使用说明书
第
10
页 共
23
页
Figure 8.5 – Choosing the bandwidth in the BW menu
8.2.6. In the
Points
menu (Figure 8.6), the user sets the number of scan points. The scanning step in
frequency and the scanning time depend on the specified number of points. The correct choice of the number of
points and scanning range allows to improve the resolution at a number of measurements (
DTF, Loss
).
Figure 8.6 – Selection menu of scan points
8.3 Plots menu settings displayed on the screen plots
8.3.1. To select the plots displayed on the device screen and adjust the parameters displayed on these plots,
enter the main menu of the device (Figure 8.1) by pressing the
"menu"
button. Enter to the
Plots
section. The
menu appears as in Figure 8.7.
