Connecting cables 18
Connecting cables
Refer to the Installation Video 'How to connect the cabling' on
https://bang-olufsen.zendesk.com/hc/en-us/articles/360042003831
Attention! Do not bend the optical cable.
The minimum bend radius for the optical cable is two centimetres.
Remember to remove plastic protection cover from optical cable.
Maximum length of Ethernet cable:
Between each amplifiers, maximum 15 metres.
Total length, maximum 40 metres.
Maximum length of speaker cable:
Between amplifier and speaker, maximum 5 metres.
Cabling between the tiles
Guide the cables between the tiles, though the cable guides. The gable guides are
placed on each sides of the tile, over the connector rails. Cover the cables and the gap
between the tiles with the gap absorber.
Note! Only one or two layers of cables in the cable guides between the tiles. If more
the fabric cover can be misplaced.
≥
2 cm
B
ANG &
OLU
FSEN
COMM OU
T
COMM IN
OPTICAL
-IN
POWER LINK
