Bang & Olufsen BeoSound Moment, Installation Manual

Page: 12 / 70

Push button functions 12
Reset functions
Factory Reset (via Settings menu)
Factory Reset is recommended to be done using the Settings menu, as follows:
- Remove Socket cover.
- Select
Reset .
- Press Reset .
- After a while the First time setup wizard starts requesting for ‘Choose language’ etc.
Factory Reset (via buttons)
- Remove Socket cover
- Press the Wireless Speaker button and the Network button simultaneously for
5 s. Meanwhile all LEDs will be solid for 5 s and then turn Off (Mute LED is not
involved).
The BeoSound Moment interface (Jukebox) will display a message indicating
that factory reset is being performed. Prerequisite to this is that the BeoSound
Moment interface (Jukebox) has connection to the BeoSound Moment hub
(SoundHeart) via the home router/AP.
- After a while the First time setup wizard starts requesting for ‘Choose language’ etc.
All LEDs
State Signal Time Comment
Factory reset Orange (solid) Off after 5 s time-out All LEDs will stay orange during the factory reset activity
Rebuild
Rebuild is activated from the BeoSound Moment interface (Jukebox) by removing the Socket cover and activating Reset and press
Rebuild
.
Rebuild is used to wipe the database of the tracks, covers and moods and when activated a new build will be made; see page 44 .
Settings regarding: language, time, date, music sources etc. are not affected.
Wireless
Speaker
button
Network
button