BandLuxe
®
M280 Series HSUPA Module Datasheet
8
1.2
Features
1.2.1
WCDMA
ó
FDD 850/1900/2100 MHz
ó
Power Class 3 (+24dBm)
ó
WCDMA 384/384 kbps downlink/uplink modem operation
ó
HSUPA 5.76 Mbps uplink modem operation
ó
HSDPA 7.2 Mbps downlink modem operation
ó
Supports UL and DL Compressed Modes
ó
Supports Circuit and Packet-Switched Data
ó
M280V supports 3G voice call via PCM interface
1.2.2
E-GPRS
ó
850/900/1800/1900 MHz
ó
GSM Power Class 4 (2W) for 850/900 bands
ó
GSM Power Class 1 (1W) for 1800/1900 bands
ó
EDGE class E2 (+27 dBm in 850/900 bands, +26 dBm in 1800/1900 bands)
ó
GPRS/EGPRS Multislot Class 12 (4 slots Rx, 4 slots Tx, 5 slots active max)
ó
GPRS/EGPRS Class B Type 1 MT
ó
GPRS CS1-CS4; EGPRS MCS1-MCS9
ó
Circuit Switched Data: 14.4 and 9.6 kbps
ó
M280V supports GSM voice call via PCM interface
1.2.3
Baseband Functionality
The M280 module interfaces with host device through PCI Express Mini Card interface. The interface equips with
USB2.0 interface, USIM interface, LED control signal, Wake# signal to request host device return from
sleep/suspended state, and W_Disable# signal to disable radio operation. There are several GPIO pins (2.6V
compatible) reserved for customized applications, please contact BandRich for discussion. Besides the above
mentioned interfaces, M280V also provides PCM interfaces reserved for voice applications.
1.2.4
Software Functionality
M280 module series is supplied with device driver of Microsoft Windows 7, Vista 32/64, Windows XP SP2 above,
Windows 2000 SP4 above, Mac OSX , and Linux. The information of firmware version operated on M280 as below:
Table 1-1
Firmware Version Information
FW Version
Description
240065-xxx-xxx Standard version for HSUPA 5.76 Mbps.
