Configuration • Service pages
Power Panel T30 User's manual V1.42 - Translation of the original documentation
75
5.1.10 Service page
Storage
On this service page, Power Panel memory can be shared to allow access from the network. The following memory
areas can be shared for network access:
•
Connected USB data storage devices
•
Internal user memory
Sharing takes place using the CIFS protocol (
C
ommon
I
nternet
F
ile
S
ystem). In this case, the Power Panel functions
as a server and makes resources (a memory area) available to a client in the network using an access mechanism.
CIFS uses a user, password and memory for authentication.
The client will require the following information to access the memory area shared on Power Panel:
CIFS user
The CIFS user cannot be configured. "
ppts30-user
" must always be used as the CIFS user.
CIFS password
The password configured on this service page password is used.
The following names can be used to specify the memory location:
Name
Description
usbshare
USB memory connected to USB interface IF3.
usbshare2
USB memory connected to USB interface IF4.
CIFS memory location
usershare
Internal user memory (flash) on the Power Panel.
The USB memory must be formatted using the FAT32 file system.
The following image shows the default settings for service page
Storage
:
Startup
Network
Time
Screen
Audio
Hand button
VNC
Web
Storage
Update
Backup & Reset
Allow access to USB memory via network
Allow access to user memory via network
Password for network access
Max. 100 characters
●●●●●●●●
Show password
Encrypt password
Save storage password encrypted
✓
Allow access to USB memory via network
Default setting: Disabled
If this option is enabled, access to the connected USB memory will be shared on the network.
Allow access to user memory via network
Default setting: Disabled
If this option is enabled, access to the internal user memory will be shared on the network.
Password for network access
Default setting: EMPTY (No password entered)
Entry range: Max. 100 characters
The CIFS password for network sharing is configured here. This password is used share USB memory internal
user memory.
The password is stored in configuration file PPTConfig.xml on the device.
Show password
Default setting: Disabled
Enabled
The password is shown in the entry field as plain text.
Disabled
The password is hidden in the entry field using placeholder characters (●●●●●●).
