Configuration • Service pages
58
Power Panel T30 User's manual V1.42 - Translation of the original documentation
5.1.2 Service page
Startup
Startup
Network
Time
Start mode
Specify the startup application
Service page
The start mode is configured the service page
Startup
and determines how the Power Panel behaves after being
switched on. The Power Panel is started in one of the following modes (
Start mode
) in accordance with this setting:
•
Service page
(Default setting)
•
VNC
•
Web
Start mode
Service page
(Default setting)
This setting is typically used during the development phase of an application because the service page is opened
immediately after every Power Panel restart.
Start mode
VNC
In Start mode, the Power Panel is started as a VNC client in order to display an HMI application that is available
on a VNC server.
In Start mode
VNC
, option
Show boot logo
is also used to configure if the system boot logo and boot animation
should be displayed when establishing a connection to the VNC server:
Startup
Network
Time
Screen
Start mode
Specify the startup application
VNC
Show boot logo
Use boot logo / animation as VNC load screen
Start mode
Web
In Start mode
Web
, a web browser that displays web server content is started immediately after restarting the
Power Panel.
In Start mode
Web
, option
Show boot logo
is also used to configure if the system boot logo and boot animation
should be displayed when establishing a connection to the web server:
Startup
Network
Time
Screen
Start mode
Specify the startup application
Web
Show boot logo
Use boot logo / animation as web load screen
Boot logo or boot animation
Requirements and information about the boot logo and boot animation can be found in the following sections:
•
•