Technical data
90
Automation PC 3100 User's manual V 1.00
Translation of the original documentation
2.3.5.8 5AC901.IRDY-00
2.3.5.8.1 General information
Ready relay 5AC901.IRDY-00 is switched as soon as the B&R industrial PC has started up and all internal supply
voltages are applied. It is possible to connect additional devices to the ready relay; they will also be switched on
when the B&R industrial PC starts up.
•
1 normally closed contact, 1 normally open contact
•
Compatible with APC910/PPC900 and APC3100/PPC3100
Terminal block 0TB2104.8000 is not included in delivery and must be ordered separately.
2.3.5.8.2 Order data
Model number
Short description
Figure
Interface options
5AC901.IRDY-00
Interface card - Ready relay - For APC910/PPC900/APC3100/
PPC3100
Required accessories
Terminal blocks
0TB2104.8000
Connector 24 VDC - 4-pin female - Screw clamp terminal block
2.5 mm²
Table 106: 5AC901.IRDY-00 - Order data
2.3.5.8.3 Technical data
Information:
The following specified characteristic data, features and limit values are only valid for this accessory
and may differ from those of the complete system. The data specified for the complete system applies
to the complete system in which this accessory is installed, for example.
Model number
5AC901.IRDY-00
General information
B&R ID code
0xD84F
Ready relay
Normally open contact and normally closed contact, max. 30 VDC, max. 2 A
Certifications
CE
Yes
UL
cULus E115267
Industrial control equipment
Electrical characteristics
Power consumption
0.2 W
Operating conditions
Pollution degree per EN 61131-2
Pollution degree 2
Environmental conditions
Temperature
Operation
0 to 60°C
1)
Storage
-20 to 60°C
Transport
-20 to 60°C
Relative humidity
Operation
5 to 90%, non-condensing
Storage
5 to 95%, non-condensing
Transport
5 to 95%, non-condensing
Mechanical characteristics
Weight
Approx. 30 g
Table 107: 5AC901.IRDY-00 - Technical data
1)
For detailed information, see the temperature tables in the user's manual.
StockCheck.com
