Technical data
68
Automation PC 3100 User's manual V 1.00
Translation of the original documentation
SDL4 interface
The following shows an overview of the video signals possible on the SDL4 output.
Graphics option
Video signals
5ACCLI02.SD40-000
SDL4
RJ45 connector, female
Table 61: SDL4 interface
Information:
Hot plugging display devices on the SDL4 interface for service purposes is supported by the hardware
and graphic drivers of approved operating systems. The female RJ45 connector is specified for 500
mating cycles.
Information:
If a display device with touch screen is disconnected from and reconnected to the SDL4 interface
during operation (hot plugging), it may be necessary to recalibrate the touch screen.
2.3.4.3.3.2 Cable lengths and resolutions for SDL4 transfer
The maximum cable length for SDL4 transfers is 100 m with a B&R
resolution).
2.3.4.3.3.3 SDL4 LEDs
The LEDs are located under the SDL4 interface.
SDL4 LEDs
LED
Color
Status
Explanation
On
Indicates an active SDL4 connection.
Link
Yellow
Off
No active SDL4 connection.
On
The SDL4 connection is established and OK.
Status
Yellow
Blinking
No active SDL4 connection.
LED "Status"
LED "Link"
Table 62: SDL4 LEDs
StockCheck.com