B&R Panel PC 3100, User Manual

Page: 42 / 277

Technical data
42 Automation PC 3100 User's manual V 1.00
Translation of the original documentation
2.2.6.10 LED status indicators
LED status indicators are located on the front of the APC3100.
Power
Disk
Link
Run
The following intervals are used for the LED status indicators:
Width of box: 250 ms
Repeat interval: 500 ms. 2 boxes thus correspond to one interval.
LED Color Status Explanation LED indicator
On Power supply OK
The device is started up; the battery state is "BAD".
Green
Blinking
Information:
For additional information, see "Battery" on page
43 .
On The system is in power saving (standby) mode (S5: soft-off
mode or S4: hibernation/suspend-to-disk mode).
Red
Blinking The MTCX is running; the battery state is "BAD". The system is in
standby mode (S5: soft-off mode or S4: hibernation/suspend-to-
disk mode).
Faulty or incomplete BIOS, MTCX or I/O FPGA update, battery
state OK, power supply OK
Faulty or incomplete BIOS, MTCX or I/O FPGA update, battery
state OK, power saving (standby) mode (S5: soft-off mode or
S4: hibernate/suspend-to-disk mode)
Faulty or incomplete BIOS, MTCX or I/O FPGA update, battery
state BAD, power supply OK
Faulty or incomplete BIOS, MTCX or I/O FPGA update, battery
state BAD, power saving (standby) mode (S5: soft-off mode or
S4: hibernate/suspend-to-disk mode)
Red-Green Blinking
Information:
An update must be performed again.
Power
Yellow On Power supply not OK. The system is running in UPS mode.
Disk Yellow On Indicates drive access (HDD, SSD, CFast)
On Indicates an active SDL connection on the panel connector.
An active SDL connection was interrupted due to power loss of
the panel.
Link Yellow
Blinking
Information:
Check the power supply or power connection of the
connected panel.
Green Blinking Automation Runtime is starting up.
Controlled by Automation Runtime (ARemb and ARwin).
Green On Application running
Controlled by Automation Runtime (ARemb and ARwin).
Red On Application in service
Controlled by Automation Runtime (ARemb and ARwin).
Run
Orange Blinking A license violation has occurred.
Table 31: LED status indicators - Data
StockCheck.com