Servicing/Maintenance
Automation PC 3100 User's manual V 1.00
Translation of the original documentation
253
7.2 Replacing CFast cards
Caution!
The CFast card is only permitted to be replaced when the power is switched off.
Improper handling of the ejection lever (e.g. applying a large amount of force) can lead to a defect in
the ejector mechanism.
1. Disconnect the power supply cable to the B&R industrial PC (disconnect the power cable).
2. Remove the Torx screw (T10) of the cover plate.
3. Remove the cover plate.
Figure 99: Removing the cover of the CFast slots
4. Press the ejector next to the card slot (see figure below).
The card is ejected and can be replaced.
Figure 100: Pressing the ejector and removing the CFast card (the figure shows CFast slot 1)
StockCheck.com
