Accessories
Automation PC 3100 User's manual V 1.00
Translation of the original documentation
235
6.5.4 SDL flex cables
6.5.4.1 5CASDL.0xxx-03
6.5.4.1.1 General information
5CASDL.0xxx-03 SDL flex cables are designed for use in fixed as well as flexible installations (e.g. swing arm
systems).
Caution!
The cable is only permitted to be connected/disconnected when the power is switched off.
6.5.4.1.2 Order data
Model number
Short description
Figure
SDL flex cables
5CASDL.0018-03
SDL flex cable - 1.8 m
5CASDL.0050-03
SDL flex cable - 5 m
5CASDL.0100-03
SDL flex cable - 10 m
5CASDL.0150-03
SDL flex cable - 15 m
5CASDL.0200-03
SDL flex cable - 20 m
5CASDL.0250-03
SDL flex cable - 25 m
5CASDL.0300-03
SDL flex cable - 30 m
Table 241: 5CASDL.0018-03, 5CASDL.0050-03, 5CASDL.0100-03, 5CASDL.0150-03,
5CASDL.0200-03, 5CASDL.0250-03, 5CASDL.0300-03 - Order data
6.5.4.1.3 Technical data
Information:
The following specified characteristic data, features and limit values are only valid for this accessory
and may differ from those of the complete system. The data specified for the complete system applies
to the complete system in which this accessory is installed, for example.
Model number
5CASDL.
0018-03
5CASDL.
0050-03
5CASDL.
0100-03
5CASDL.
0150-03
5CASDL.
0200-03
5CASDL.
0250-03
5CASDL.
0300-03
General information
Certifications
CE
Yes
UL
cULus E115267
Industrial control equipment
HazLoc
cULus HazLoc E180196
Industrial control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T4
1)
DNV GL
Temperature:
B
(0 - 55°C)
Humidity:
B
(up to 100%)
Vibration:
A
(0.7 g)
EMC:
B
(Bridge and open deck)
2)
GOST-R
Yes
Cable construction
Wire cross section
24 AWG (control wires)
26 AWG (DVI, USB, data)
Properties
Halogen- and silicone-free
Shield
Individual cable pairs, entire cable
Complete shielding
Aluminum-clad foil and tinned copper braiding
Outer jacket
Material
Special semi-matte TMPU
Color
Black
Labeling
(B&R) SDL Cable (UL) AWM 20236 80°C 30V E 63216
Connector
Type
2x DVI-D (24+1), male
Connection cycles
Min. 200
Contacts
Gold-plated
Mechanical protection
Metal cover with crimped strain relief
Locating screw tightening torque
Max. 0.5 Nm
Electrical characteristics
Operating voltage
≤30 V
Table 242: 5CASDL.0018-03, 5CASDL.0050-03, 5CASDL.0100-03, 5CASDL.0150-03,
5CASDL.0200-03, 5CASDL.0250-03, 5CASDL.0300-03 - Technical data
StockCheck.com
