Software
Automation PC 3100 User's manual V 1.00
Translation of the original documentation
183
4.3.1.2 Create RAID volume
Intel(R) Rapid Storage Technology - Option ROM - 15.7.0.3054
Copyright(C) Intel Corporation. All Rights Reserved.
[ ]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select
¯
Enter a unique volume name that has no special characters and is
16 characters or less.
Name:
Mirror
RAID LEVEL: RAID1(Mirror)
Disks:
Select Disk
Strip Size: N/A
Capacity: 59.6 GB
Sync:
N/A
Create Volume
[
]
CREATE VOLUME MENU
[
]
HELP
Figure 54: Creating a RAID volume
BIOS parameter
Setting options
Description
Name
String
Default:
Volume1
Name for the RAID volume
No special characters are permitted.
Range: Max. 16 characters
RAID0 (Stripes)
RAID1 (Mirror)
RAID level
1)
Recovery
Selects the RAID level
Master
Disks
2)
Recovery
Defines the storage media mode
4 KB
8 KB
16 KB
32 KB
64 KB
Strip size
3)
128 KB
Selects the data block size [kB]
Capacity
INT
Defines the RAID memory size
Range: Hardware-dependent
If storage media of different sizes are used, this is limited to the smaller medium.
Continuous
Sync
4)
On request
Selects the synchronization mode
Create volume
Enter
Creates a RAID volume according to the configuration
Table 213: Configuration Utility - Create RAID volume
1)
Grayed-out parameters cannot be modified in the currently selected RAID level.
2)
This setting is only possible if
RAID level
is set to
Recovery
.
3)
This setting is only possible if
RAID level
is set to
RAID0(Stripe)
.
4)
This setting is only possible if
RAID level
is set to
Recovery
.
4.3.1.3 Delete RAID volume
The "Delete RAID volume" menu option can be used to format the RAID drive, making it non-RAID. The drive to
be deleted is selected and then deleted by pressing <DEL>.
Information:
This option deletes all data on the drive, including the operating system.
StockCheck.com
