Technical data
96
Panel PC 2100 user's manual V1.17
Product ID
5AP1151.0573-000
Revision
D0
E0
Operating conditions
Pollution degree per EN 61131-2
Pollution degree 2
Degree of protection per EN 60529
Front: IP65
Back: IP20 (only with installed link module or installed system unit)
Protection per UL 50
Front: Type 4X indoor use only
Mechanical properties
Front
3)
Frame
Aluminum, naturally anodized
Keypad overlay
Material
Polyester
Light background
RAL 9006
Dark gray border around display
RAL 7024
Gasket
3 mm built-in gasket
Dimensions
Width
212 mm
Height
245 mm
Weight
1400 g
Table 67: 5AP1151.0573-000, 5AP1151.0573-000 - Technical data
1)
Yes, although applies only if all components installed in the complete system have this certification and the complete system bears the corresponding mark.
2)
At an ambient temperature of 25°C. Reducing the brightness by 50% can increase the half-brightness time by approximately 50%.
3)
There may be visible deviations in the color and surface appearance depending on the process or batch.
2.3.2.2.4 Dimensions
212
24
5
Figure 65: 5AP1151.0573-000 - Dimensions
2.3.2.2.5 Requirements
5.7" AP1000 panels are supported starting with the following firmware versions:
•
Firmware V3.11 or later for SDL/DVI receiver 5DLSDL.1001-00
•
Firmware V4.08 or later for SDL3 receiver 5DLSD3.1001-00
•
V1.03 for the 5PPC2100.BYxx-000 PPC2100 system unit
