B&R Mobile Panel 7200, User Manual, Page: 71 / 80

Accessories
Mobile Panel 7200 User's manual V 1.01 71
7.4.1.3 Technical data
Information:
The following specified characteristic data, features and limit values are only valid for this accessory
and may differ from those of the complete system. The data specified for the complete system applies
to the complete system in which this accessory is installed, for example.
Model number 5CAMPB.0050-10 5CAMPB.0100-10
General information
Certifications
CE Yes
UL cULus E115267
Industrial control equipment
Cable construction
Type Hybrid cable, 25 wires
Properties Halogen- and silicone-free
Supply lines
Material Tinned copper stranded wire
Permissible operating voltage +30 VDC
Outer jacket
Material Flame-retardant PUR
Color Similar to RAL 7012
Cable elements
Control devices Direct connection between control devices and monitoring device (6 wires)
CAN 2 pairs with shielding (5 wires)
Ethernet Twisted pair cable for Ethernet (10/100 Mbit/s) (4 wires, male RJ45 connector)
Serial 3 wires
Power supply +24 VDC supply voltage and grounding (3 wires), SELV
1)
Enable switch Direct connection between enable switch and monitoring device (6 wires)
Connector
Type FA. Jacob GmbH type: PERFECT 50.620 M
Electrical properties
Conductor resistance ≤140 Ω/km (0.15 mm² conductor)
≤27 Ω/km (0.75 mm² conductor)
Insulation resistance ≤500 Ω/km
Operating conditions
Flame-retardant Per IEC 60332-1 and VW1 / FT1 in accordance with C-UL
Shield attenuation Per IEC 60096-1, Amendment 2
Oil and hydrolysis resistance Per VDE 0282-10
Ambient conditions
Temperature
Moving -20 to 60°C
Static -20 to 80°C
Mechanical properties
Dimensions
Length 5 m ±14 cm 10 m ±20 cm
Diameter 10 mm
Bend radius
Moving 60 mm
Fixed installation 30 mm
Weight 160 g/m
Tension Max. 140 N
Table 25: 5CAMPB.0050-10, 5CAMPB.0100-10 - Technical data
1) EN 60950 requirements must be observed.