Accessories
70
Mobile Panel 7200 User's manual V 1.01
7.4 Box cables
7.4.1 5CAMPB.0xxx-10
7.4.1.1 General information
A box cable establishes the electrical connection between the control cabinet and connection box
4MPCBX.0000-00. It includes lines for the network (Ethernet 10/100 Mbit/s), +24 VDC power supply, control de-
vices or stop / emergency stop and key switches or pushbuttons, enable switches, serial transfer and CAN.
The connection side has a pre-assembled RJ45 Ethernet connection. The remaining cables are open with wire
end sleeves to simplify further wiring to the safety equipment and other connections. The box cable is installed in
the connection box on the other side (connection box side).
The pinout of the RJ45 Ethernet connection (crossover) permits direct connection to a B&R controller. If an Ethernet
hub is used, it must support crossover RX and TX lines.
The surface is protected against water, oil (lubricating and hydraulic oils per EN 60811 Part 2-1) and cooling
lubricant.
7.4.1.2 Order data
Model number
Short description
Figure
Accessories
5CAMPB.0050-10
Mobile Panel box cable - With wire end sleeves - With connector
contacts
5CAMPB.0100-10
Mobile Panel box cable - With wire end sleeves - With connector
contacts
Table 24: 5CAMPB.0050-10, 5CAMPB.0100-10 - Order data
