Software
Mobile Panel 7200 User's manual V 1.01
51
4.3.1 ADI driver
4.3.1.1 Installation
The ADI driver is included in B&R Windows operating systems.
The ADI driver (also includes the Control Center) can be downloaded at no cost from the Downloads section of the
). If a more recent version is available, it can be installed later.
Information:
The
Write filter
must be disabled during installation.
4.3.1.2 Control Center
The settings of B&R devices can be read out and changed in Windows us-
ing the Control Center in the Control Panel. The figure shown is a symbolic
image; the representation may vary depending on the device.
Information:
The displayed temperature and voltage values (e.g. CPU temper-
ature, core voltage, battery voltage) represent uncalibrated infor-
mation values. No conclusions about possible alarms or hardware
malfunctions can be drawn from this. The hardware components
used have automatic diagnostic functions in the event of error.
4.3.1.2.1 Functions
The Control Center offers the following functions, for example:
•
Changing display-specific parameters
•
Reading out device-specific keys
•
Updating the key configuration
•
Testing keys or device-specific LEDs of a membrane keypad
•
Reading out control devices (e.g. key switch, handwheel)
•
Reading out temperatures, fan speeds and statistical data
•
Reading out operating hours (power-on hours)
•
Reading user settings and factory settings
•
Reading software versions
•
Updating and backing up firmware
•
Creating reports for the current system (support)
•
Setting the SDL equalizer value for the SDL cable adjustment
•
Changing the user serial ID
, see either the Control Center's integrated online help for a detailed description.
Information:
The functions available in the Control Center depend on the device family.
4.3.1.3 Characteristics, limitations
The set display brightness (e.g. via the B&R Control Center or ADI library) is only effective until the system is
restarted. The display brightness can be permanently adjusted in the operating system under
Start / Settings /
System / Display / Adjust brightness level
.
