B&R MAPPC800-ENG, User Manual

Page: 353 / 396

Appendix A • Temperature sensor locations
Appen
dix
A
353 Panel PC 800 User's Manual V 1.00
Appendix A
1. Temperature sensor locations
Sensors monitor temperature values in many different areas in the PPC800. The temperatures
1)
can be read in BIOS (menu item "Advanced" - Baseboard/panel features - Baseboard monitor)
or in Microsoft Windows XP/Embedded or Windows Embedded Standard 2009, using the B&R
Control Center
2)
.
1) The measured temperature is a guideline for the immediate ambient temperature, but can be influenced by neighboring components.
2) The B&R Control Center - ADI driver - can be downloaded for free from the download area on the B&R homepage ( www.br-
automation.com ).
Figure 177: Temperature sensor locations
Position Measurement
point for Measurement Max. specified
1 Board I/O Board I/O area temperature (sensor on the baseboard). 80°C
2 Board ETH2 Baseboard temperature near the ETH2 controller (sensor on the baseboard). 80°C
3 Board Power Board power supply temperature (sensor on the baseboard). 80°C
4 Power supply Power supply temperature. 80°C
- Slide-in drive 1 Temperature of a slide-in drive (the sensor is integrated on the slide-in drive). Depending on the
slide-in drive
being used
- IF slot Temperature of the PCIec slot; the sensor is located directly on the plug-in card. Depending on the
plug-in cards
used
Table 227: Temperature sensor locations
2
3
4
1