B&R MAPPC800-ENG, User Manual

Page: 341 / 396

Accessories • Cables
Section 6
Accessories
341 Panel PC 800 User's Manual V 1.00
13.5 SDL flex cable with extender 5CASDL.0x00-13
The SDL flex cables (with extender) 5CASDL.0x00-13 are designed for both fixed and flexible
installations (e.g. in swing arm systems).
13.5.1 Order data
13.5.2 Technical data
Figure 167: SDL flex cable with extender - 5CASDL.0x00-13 (similar)
Caution!
SDL cables with extender can only be plugged in and unplugged when the device is
turned off. The correct direction of connection (SDL IN, SDL OUT) for the wiring is
illustrated on the middle of the extender and between the ferrite magnet and plug
(with a sticker).
Model number Description Note
5CASDL.0300-13 30 m SDL flex cable with extender
SDL cable with extender for fixed and flexible type of layout; length: 30 m
5CASDL.0400-13 40 m SDL flex cable with extender
SDL cable with extender for fixed and flexible type of layout; length: 40 m
Table 220: Model numbers - SDL flex cable with extender
Features 5CASDL.0300-13 5CASDL.0400-13
Length
Tolerance
30 m
±200 mm
40 m
±200 mm
Dimensions - Extender box Height 18.5 mm, width 35 mm, length 125 mm
Cable diameter
Maximum 12 mm
Shielding Individual cable pairs and entire cable
Connector type
Connection cycles
Contacts
Mechanical protection
2x DVI-D (24+1), male
Min. 200
Gold plated
Metal cover with crimped stress relief
Max. tension
During installation
During operation
≤
400 N
≤
50 N
Table 221: Technical data - SDL flex cable with extender 5CASDL.0x00-13
SDL IN SDL OUT
SDL IN
SDL OUT
Plug Ferrite Extender Plug Ferrite
SDL IN
SDL OUT
Label Label