B&R MAPPC800-ENG, User Manual

Page: 218 / 396

218
Software • BIOS options
Panel PC 800 User's Manual V 1.00
If the function "load setup defaults" is chosen in the main BIOS setup menu, or if exit is selected
(or <F9> is pressed) in the individual setup screens, the following BIOS settings are the
optimized values that will be used.
The following pages provide an overview of the BIOS default settings for the different CMOS
profile switch positions. Settings highlighted in yellow are variations from the BIOS default profile
(=profile 0).
Figure 113: CMOS profile hex switch
Information:
The switch position that is set upon delivery represents the optimum BIOS default
values for this system and should therefore not be changed.
Profile number Optimized for Switch position Note
Profile 0 Reserved 0
Profile 1 System unit 5PC810.SX01-00 /
5PC810.SX02-00 1 The default settings for this profile
can be found in the APC810 user's
manual. This can be downloaded for
free from the B&R homepage.
Profile 2 System unit 5PC810.SX05-00 2
Profile 3 System unit 5PC820.SX01-00/
5PC820.SX01-01 3 The default settings for this profile
can be found in the APC820 user's
manual. This can be downloaded for
free from the B&R homepage.
Profile 4 Reserved 4
Profile 5 System unit 5PC820.1505-00 /
5PC820.1906-00 5
Table 120: Profile overview