B&R MAPPC800-ENG, User Manual

Page: 198 / 396

198
Software • BIOS options
Panel PC 800 User's Manual V 1.00
1.4.10 USB configuration
PIO Mode The PIO mode determines the data rate of
the hard drive.
Information:
This option is not available on the
PPC800. Therefore this setting is not
relevant.
Auto Automatic configuration of PIO mode.
0, 1, 2, 3, 4
Manual configuration of PIO mode.
DMA Mode The data transfer rate to and from the
primary master drive is defined here.
The DMA mode must be activated in the
Windows device manager in order to
guarantee maximum performance. Only
possible when manually setting up the
drive. Auto Automatic definition of the transfer rate.
Disabled Manual definition of the transfer rate.
S.M.A.R.T. Monitoring function of modern hard drives
(self-monitoring, analysis and reporting
technology). Auto Automatic detection and enabling.
Disabled Disables this function.
Enabled Enables this function.
32 Bit Data Transfer This function enables 32-bit data transfer. Disabled Disables this function.
Enabled Enables this function.
Figure 99: 945GME - Advanced USB Configuration
BIOS setting Meaning Setting options Effect
Table 105: 945GME - Secondary IDE Slave - Setting options (cont.)
Advanced
USB Configuration
USB Devices Enabled :
Options
USB 2.0 Controller [Enabled]
Legacy USB Support [Enabled]
USB Legacy POST-Always [Enabled]
USB Keyboard Legacy Support
Disabled
2 USB Ports
4 USB Ports
6 USB Ports
8 USB Ports
[Enabled]
USB Mouse Legacy Support [Disabled]
USB Storage Device Support [Enabled] Select Screen
Port 64/60 Emulation [Disabled] Select Item
USB 2.0 Controller Mode [HiSpeed] +- Change Option
BIOS EHCI Hand-Off [Disabled] F1 General Help
USB Beep Message [Enabled] F10 Save and Exit
USB Stick Default Emulation [Hard Disk] ESC Exit
USB Mass Storage Reset Delay [20 Sec]
1 Keyboard, 1 Hub
USB Functions [8 USB Ports]
BIOS SETUP UTILITY
v02.59 (C)Copyright 1985-2005, American Megatrends, Inc.