B&R MAPPC700A-ENG, User Manual

Page: 461 / 524

Maintenance / Servicing • Fan kit installation and replacement
Ch
apte
r 7
Ma
inte
nanc
e /
Servic
ing
461 Panel PC 700 with 945GME N270 CPU board User's Manual V 1.16
• Loosen the screws on the side cover (using Torx screw driver size 10) and remove the
cover.
• The fan connection cable must be connected to the main circuit board at the right position
(fan 1 at position 1, fan 2 at position 2).
• If a PCI card was previously in place, it can now be re-inserted.
• Place dust filter in the fan kit cover and replace removed components (filter kit cover, side
cover) in reverse order.
Figure 264: Removing the side cover
Figure 265: Fan cable connection on the main board
2
2
1
1