B&R MAPPC700A-ENG, User Manual

Page: 329 / 524

Software • Panel PC 700 with Windows XP Professional
Ch
apte
r 4
Soft
w
are
329 Panel PC 700 with 945GME N270 CPU board User's Manual V 1.16
4.1 Installation
Upon request, B&R can pre-install the required Windows XP Professional version on the desired
mass memory (add-on hard disk, slide-in hard disk). All of the drivers required for operation
(graphics, network, etc.) are also installed when doing so.
4.1.1 Installation auf PCI SATA RAID Controller - 5ACPCI.RAIC-03, 5ACPCI.RAIC-05
The following steps are necessary for installing Windows XP Professional on the PCI SATA
RAID controller:
1) Download the RAID driver from the B&R homepage ( www.br-automation.com ) and copy
the files to a diskette.
2) Connect the Media DrivIne (5MD900.USB2-01) to the USB port.
3) Insert the diskette and Windows XP Professional CD in the the Media Drive and boot from
the CD.
4) Press the F6 key during setup to install a third-party SCSI or a driver.
5) Press the "s" key when asked about installing an additional drive. Insert the disk in the floppy
drive. Press "Enter" and select the driver.
6) Follow the setup instructions.
7) The setup copies the files to the Windows XP Professional folder and restarts the Panel PC
700.
4.2 Drivers
The latest drivers for all released operating systems can be found in the download area (Service
- Material Related Downloads - BIOS / Drivers / Updates) on the B&R homepage (
www.br-
automation.com ).
Information:
• Windows XP setup supports not all USB-FDD drives (see Microsoft KB
916196).
• Depending on the system it could be neccesary to change the boot order in
BIOS.
Information:
Required drivers can only be downloaded from the B&R homepage, not from
manufacturers' pages.