Introduction • Organization of notices
Chapter 1 Introduction
ETAL210.1050-1 user's manual V1.00
3
Chapter 1 • Introduction
1 Manual history
Version
Date
Change
0.10
May 2019
First internal version
1.1 INFOBOX: Current user's manual
Information:
B&R makes every effort to keep documents as current possible. The most current versions can be
downloaded from the B&R website (
).
2 Note regarding additional documentation
This documentation describes the entire product and its intended use in addition to safety guidelines for using
the product.
For information about the components used in the product, see the documentation of the individual components
on our website. For an overview of the components used, see the technical data of this product.
3 Organization of notices
Safety guidelines
Contain
only
information that warns of dangerous functions or situations.
Signal word
Description
Danger!
Failure to observe these safety guidelines and notices will result in death, severe injury or substantial damage to property.
Warning!
Failure to observe these safety guidelines and notices can result in death, severe injury or substantial damage to property.
Caution!
Failure to observe these safety guidelines and notices can result in minor injury or damage to property.
Notice!
Failure to observe these safety guidelines and notices can result in damage to property.
Contain
useful
information for users and instructions for avoiding malfunctions.
Signal word
Description
Information:
Useful information, application tips and instructions for avoiding malfunctions.
European dimension standards apply to all dimension diagrams.
All dimensions in millimeters.
Unless otherwise specified, the following general tolerances apply:
Nominal dimension range
General tolerance per
DIN ISO 2768 medium
Up to 6 mm
±0.1 mm
Over 6 to 30 mm
±0.2 mm
Over 30 to 120 mm
±0.3 mm
Over 120 to 400 mm
±0.5 mm
Over 400 to 1000 mm
±0.8 mm
