Technical data • Complete device
Chapter 2
Technical data
Automation PC 910 User's Manual V 1.00
39
2.5.8 USB ports
The APC910 features a USB 3.0 (Universal Serial Bus) host controller with multiple USB ports, four of which are
accessible externally for easy user access. The 4 USB ports (USB1-4) on the top are USB 3.0 ports. The USB
port on the front (USB5) is a USB 2.0 port.
Warning!
Peripheral USB devices can be connected to the USB interfaces. Due to the vast number of USB devices
available on the market, B&R cannot guarantee their performance. B&R does ensure the performance
of all USB devices that they provide.
Caution!
Because this interface is designed according to general PC specifications, extreme care should be
exercised with regard to EMC, cable routing, etc.
USB1, USB2, USB3, USB4
4 USB 3.0 ports are provided on the top of the APC910.
Universal Serial Bus (USB1, USB2, USB3, USB4)
1)
Type
USB 2.0 / 3.0
Design
Type A
Transfer rate
Low speed (1.5 Mbit/s), full speed (12 Mbit/s),
high speed (480 Mbit/s), super speed (5 GBit/s)
Current load
2)
USB1, USB2
USB3, USB4
Max. 1 A
Max. 1 A
Cable length
USB 2.0
USB 3.0
Max. 5 m (without hub)
Max. TBD m (without hub)
4x USB type A, female
USB3
USB4
USB2
USB1
Table 22: USB1, USB2, USB3, USB4 connection
1)
The interfaces, etc. available on the device or module have been numbered as such for easy identification. This numbering can differ from that used by
the particular operating system.
2)
Each USB port is secured with a maintenance-free "USB current-limiting circuit breaker" (max. 1 A).
USB5
A USB 2.0 port is provided on the front side of the APC910 behind the front cover.
Universal Serial Bus (USB5)
1)
Type
USB 2.0
Design
Type A
Transfer rate
Low speed (1.5 Mbit/s), full speed (12 Mbit/s),
high speed (480 Mbit/s)
Current load
2)
USB5
Max. 1 A
Cable length
Max. 5 m (without hub)
1x USB type A, female
USB5
Table 23: USB5 connection
1)
The interfaces, etc. available on the device or module have been numbered as such for easy identification. This numbering can differ from that used by
the particular operating system.
2)
Each USB port is secured with a maintenance-free "USB current-limiting circuit breaker" (max. 1 A).