Software • B&R Automation Device Interface (ADI) - Control Center
100
Automation PC 910 User's Manual V 1.00
5 B&R Automation Device Interface (ADI) - Control Center
The ADI (Automation Device Interface) enables access to specific functions of B&R devices. Settings for this device
can be read and edited using the B&R Control Center applet in the control panel.
Figure 34: ADI Control Center screenshots - Examples (symbol photo)
Information:
The displayed temperature and voltage values (e.g. CPU temperature, core voltage, battery voltage) on
the corresponding ADI page represent uncalibrated information values. These cannot be used to draw
any conclusions about any hardware alarms or error conditions. The hardware components used have
automatic diagnostics functions that can be applied in the event of error.
5.1 Functions
Information:
The functions provided by the Automation Device Interface (ADI) - Control Center vary according to
device series.
•
Changing display-specific parameters
•
Reading device-specific keys
•
Updating the key configuration
•
Activating device-specific LEDs on a membrane keypad
•
Read or calibrate the entry devices (e.g. key switch, handwheel, joystick, potentiometer)
•
Reading temperatures, fan speeds, statistical data and switch settings
•
Read the operating hours (power on hours)
•
Reading user and factory settings
•
Reading software versions
•
Updating and securing BIOS and firmware
•
Creating reports about the current system (support assistance)
•
Setting the SDL equalizer value for the SDL cable adjustment
•
Changing the User Serial ID