Accessories • PCI Insert cards
348
Automation PC 810 with GM45 CPU board user's manual V1.28
Product ID
5ACPCI.ETH3-01
Interfaces
Ethernet
Quantity
3
Controller
Intel 82551ER
Design
Shielded RJ45 port
Transfer rate
10/100 Mbit/s
Cable length
Max. 100 m between two stations (segment length)
Recommendations
Specified standard
CE (CE)
Yes
UL 508 (cULus)
LISTED 14F2 BR
GL (GL)
Cat. C EMC 1
Recommendations
Specified standard
CE (CE)
Yes
UL 508 (cULus)
LISTED 14F2 BR
GL (GL)
Cat. C EMC 1
Table 275: 5ACPCI.ETH3-01 - Technical data
11.2.3.1 Ethernet interface
Information:
The following characteristics, features, and limit values only apply to this individual component and
can deviate from those specified for the entire device. For the entire device in which this individual
component is used, refer to the data given specifically for the entire device.
Ethernet connections
Controller
each with Intel 82551ER
Power supply
Universal card (2 notches) for 3.3 V or 5 V
Cabling
S/STP (Cat 5e)
Transfer rate
10/100 Mbit/s
Cable length
Max. 100 m (min. Cat 5e)
LED
On
Off
Green
100 Mbit/s
10 Mbit/s
Orange
Link (Ethernet network
connection available)
Activity (blinking - da-
ta transfer in progress)
Speed Act/Link
ETH1
Speed Act/Link
Speed Act/Link
ETH2
ETH3
Table 276: 5ACPCI.ETH3-01 - Technical data
11.2.4 Driver support
A special driver is required in order to operate the Intel 82551ER Ethernet controller. Drivers for approved operating
systems (Windows XP Professional, Windows XP Embedded and MS-DOS) are available in the Downloads section
of the B&R website (
Information:
Required drivers can only be downloaded from the B&R website, not from manufacturer websites.
