Software • Upgrade information
256
Automation PC 810 with GM45 CPU board user's manual V1.28
Information:
The version can only be displayed when an Automation Panel with an AP Link SDL transmitter
(5AC801.SDL0-00) is connected.
Advanced
Panel Control
Panel 0-14: connected
to Automation Panel
Link or Monitor/Panel
connector.
Brightness: [100%]
Panel 15: connected on
Panel PC Link.
Note: DVI and PPC Link
will show no valid
values. On PPC Link
only the brightness
option will work.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Select Panel Number [0]
Version: V1.17
Temperature: 41°C/105°F
Fan Speed: 00 RPM
Keys/Leds: 128/128
BIOS SETUP UTILITY
v02.59 (C)Copyright 1985-2005, American Megatrends, Inc.
Firmware des
SDLR Controllers
Figure 140: Firmware version of the AP Link SDL transmitter
2.1.2 Procedure with MS-DOS
1. Download the .zip file from the B&R website (
).
2. Create bootable media.
Information:
In MS-DOS, Win95 and Win98, a blank HD disk can be made bootable by typing "sys a:" or "format a: /
s" on the command line.
Information about creating a bootable diskette in Windows XP can be found on page 261.
Information on creating a USB flash drive for a B&R upgrade can be found on page 263.
Information on creating a CompactFlash card for a B&R upgrade can be found on page 264.
3. Copy the contents of the .zip file to the bootable media. If the B&R upgrade was already added when creating
the bootable media with the B&R Embedded OS Installer, then this step is not necessary.
4. Connect the bootable media to the B&R device and reboot.
5. The following boot menu will be shown after startup:
1 . U p g r a d e A M I B I O S f o r B M 4 5 ( 5 P C 8 0 0 . B M 4 5 - 0 0 , - 0 1 )
2 . E x i t
Concerning item 1:
BIOS is automatically upgraded (default after 5 seconds).
Concerning item 2:
Returns to the shell (MS-DOS).
